Category details - Iowa State University research repository

DATASET

PFAS in Iowa Drinking Water Sources

dataset posted on 2025-04-11

Synchrotron XRD data on plastic strain-induced phase transformations in Si

dataset posted on 2024-12-09

3D analog and numerical experiments on grain comminution

dataset posted on 2024-04-26

ISU-ILCC Battery Aging Dataset

dataset posted on 2023-12-21

DATASET

Data for: Squeezed Nanocrystals: Equilibrium Configuration of Metal Clusters Embedded Beneath the Surface of a Layered Material

dataset posted on 2022-01-31

collection:
Blood stain pattern and fluid dynamics datasets

posted on 2021-11-05

DATASET

High speed imaging sequences of muzzle gas and muzzle gas/blood interactions

dataset posted on 2021-10-28

DATASET

SCRATA cubes point clouds and roughness results

dataset posted on 2021-09-10

collection:
Data Sets Used in Statistical Methods for Reliability Data (Second Edition)

posted on 2021-06-11

Reliability Data: Recurrent Events Data

dataset posted on 2021-06-11

Reliability Data: Repeated Measured Degradation Data

dataset posted on 2021-06-11

Reliability Data: Destructive Degradation Data

dataset posted on 2021-06-11

Reliability Data: Field Failure-time Data

dataset posted on 2021-06-11

Reliability Data: Laboratory Failure-Time and Single-Time Strength Data

dataset posted on 2021-06-11

Texture data of Additively Manufactured Ti-6Al-4V (Different Scanning Strategies)

dataset posted on 2021-04-16

Salt-induced coil-to-globular transition and interfacial assembly in poly(N-isopropylacrylamide)-capped gold nanoparticles

dataset posted on 2020-11-18

collection:
Materials Characterization of High-Temperature Oxidation on ferritic Fe-Cr-Al-Mo alloy Kanthal APMT and Cr-Mo-V steel T91 (UNS: K90901)

posted on 2020-10-02

DATASET

Data on fifth-degree elastic energy for predictive continuum stress-strain relations and elastic instabilities under large strain and complex loading in silicon

dataset posted on 2020-07-20

DATASET

Experimental data for study of kinetics of plastic strain induced phase transition in ultra pure Zirconium

dataset posted on 2020-07-09

Raman spectroscopy analysis of cross-sectioned ferritic Cr-Mo-V steel T91 (UNS: K90901) after oxidation at 1200 C for 2 h in air and steam

figure posted on 2020-04-07

Comparison of results from Raman and EDS/SEM analysis of ferritic Cr-Mo-V steel T91 (UNS: K90901) cross-sectioned after oxidation at 1200 C for 2 hrs in air

figure posted on 2020-04-07

Raman spectroscopy of surfaces on ferritic Fe-Cr-Al-Mo alloy Kanthal APMT and Cr-Mo-V steel T91 (UNS: K90901) after oxidation at 1200 C for 2 h

figure posted on 2020-03-23

Photos and optical microscope images of ferritic Fe-Cr-Al-Mo alloy Kanthal APMT and Cr-Mo-V steel T91 (UNS: K90901) after oxidation at 1200 C for 2 h

figure posted on 2020-03-16

SEM images of surfaces on ferritic Fe-Cr-Al-Mo alloy Kanthal APMT and Cr-Mo-V steel T91 (UNS: K90901) after oxidation at 1200 C for 2 h

figure posted on 2020-03-16

SEM/EDS analysis of surfaces of ferritic Fe-Cr-Al-Mo alloy Kanthal APMT and Cr-Mo-V steel T91 (UNS: K90901) after oxidation at 1200 C for 2 h

figure posted on 2020-03-16

SEM/EDS analysis cross-sectioned segments of ferritic Fe-Cr-Al-Mo alloy Kanthal APMT and Cr-Mo-V steel T91 (UNS: K90901) after oxidation at 1200 C for 2 h

figure posted on 2020-03-16

$Analysis of ferritic Cr-Mo-V steel T91 (UNS: K90901) after oxidation at 1200 C for 2 h using synchrotron x-ray diffraction$

Analysis of ferritic Cr-Mo-V steel T91 (UNS: K90901) after oxidation at 1200 C for 2 h using synchrotron x-ray diffraction

figure posted on 2020-03-16

Imaging of Unstained DNA Origami Triangles with Electron Microscopy

dataset posted on 2019-06-05

New Approach to Electron Microscopy Imaging of Gel Nanocomposites in situ

dataset posted on 2019-02-13

(111) single crystal NaAu2 images, parameters, and data

dataset posted on 2019-01-23

DATASET

Lattice instability during solid-solid structural transformations under general applied stress tensor: example of Si I to Si II with metallization

dataset posted on 2018-09-28

Engineering

PFAS in Iowa Drinking Water Sources

Synchrotron XRD data on plastic strain-induced phase transformations in Si

3D analog and numerical experiments on grain comminution

ISU-ILCC Battery Aging Dataset

Data for: Squeezed Nanocrystals: Equilibrium Configuration of Metal Clusters Embedded Beneath the Surface of a Layered Material

collection: Blood stain pattern and fluid dynamics datasets

High speed imaging sequences of muzzle gas and muzzle gas/blood interactions

SCRATA cubes point clouds and roughness results

collection: Data Sets Used in Statistical Methods for Reliability Data (Second Edition)

Reliability Data: Recurrent Events Data

Reliability Data: Repeated Measured Degradation Data

Reliability Data: Destructive Degradation Data

Reliability Data: Field Failure-time Data

Reliability Data: Laboratory Failure-Time and Single-Time Strength Data

Texture data of Additively Manufactured Ti-6Al-4V (Different Scanning Strategies)

Salt-induced coil-to-globular transition and interfacial assembly in poly(N-isopropylacrylamide)-capped gold nanoparticles

collection: Materials Characterization of High-Temperature Oxidation on ferritic Fe-Cr-Al-Mo alloy Kanthal APMT and Cr-Mo-V steel T91 (UNS: K90901)

Data on fifth-degree elastic energy for predictive continuum stress-strain relations and elastic instabilities under large strain and complex loading in silicon

Experimental data for study of kinetics of plastic strain induced phase transition in ultra pure Zirconium

Raman spectroscopy analysis of cross-sectioned ferritic Cr-Mo-V steel T91 (UNS: K90901) after oxidation at 1200 C for 2 h in air and steam

Comparison of results from Raman and EDS/SEM analysis of ferritic Cr-Mo-V steel T91 (UNS: K90901) cross-sectioned after oxidation at 1200 C for 2 hrs in air

Raman spectroscopy of surfaces on ferritic Fe-Cr-Al-Mo alloy Kanthal APMT and Cr-Mo-V steel T91 (UNS: K90901) after oxidation at 1200 C for 2 h

Photos and optical microscope images of ferritic Fe-Cr-Al-Mo alloy Kanthal APMT and Cr-Mo-V steel T91 (UNS: K90901) after oxidation at 1200 C for 2 h

SEM images of surfaces on ferritic Fe-Cr-Al-Mo alloy Kanthal APMT and Cr-Mo-V steel T91 (UNS: K90901) after oxidation at 1200 C for 2 h

SEM/EDS analysis of surfaces of ferritic Fe-Cr-Al-Mo alloy Kanthal APMT and Cr-Mo-V steel T91 (UNS: K90901) after oxidation at 1200 C for 2 h

SEM/EDS analysis cross-sectioned segments of ferritic Fe-Cr-Al-Mo alloy Kanthal APMT and Cr-Mo-V steel T91 (UNS: K90901) after oxidation at 1200 C for 2 h

Analysis of ferritic Cr-Mo-V steel T91 (UNS: K90901) after oxidation at 1200 C for 2 h using synchrotron x-ray diffraction

Imaging of Unstained DNA Origami Triangles with Electron Microscopy

New Approach to Electron Microscopy Imaging of Gel Nanocomposites in situ

(111) single crystal NaAu2 images, parameters, and data

Lattice instability during solid-solid structural transformations under general applied stress tensor: example of Si I to Si II with metallization

collection:
Blood stain pattern and fluid dynamics datasets

collection:
Data Sets Used in Statistical Methods for Reliability Data (Second Edition)

collection:
Materials Characterization of High-Temperature Oxidation on ferritic Fe-Cr-Al-Mo alloy Kanthal APMT and Cr-Mo-V steel T91 (UNS: K90901)